Disclaimer
The information in this standard is provided on the following basis. The phytosanitary requirements found in this standard may be used as the basis of export certification. However, requirements may be changed by importing countries at any time at short notice or with no notice to New Zealand. This information is provided strictly on the basis that the Crown, the Ministry for Primary Industries, its statutory officers, employees, agents and all other persons responsible for or associated with the compilation, writing, editing, approval or publication of the information:
- disclaim any and all responsibility for any inaccuracy, error, omission, lateness, or any other kind of inadequacy, deficiency or flaw in, or in relation to, the information; and
- without limiting (1) above, fully exclude any and all liability of any kind on the part of all of them, to any person or entity that chooses to rely on this information
Compliance with this standard is not to be taken as a guarantee that any particular goods will be granted access to any overseas market.
Last Updated: 14 September 2017
Commodities
Logs
Import Permits or Declarations | Import permit required. |
Certification Requirements | Phytosanitary certificate required. |
Prohibited Importations | |
Bark | See conditions on the import permit. |
Insects | Free of quarantine pests. |
Fungi | Free of quarantine pests. |
Soil | Free of soil and debris. |
Other | Free of leaves and foreign matter. |
Pre-Shipment Inspections | Verification inspection required. |
Approved Pre-Shipment Treatments | See conditions on the import permit. |
Fumigation | |
Antisapstain treatments | |
Insecticide treatments | |
Heat treatments | |
Preservative treatments | |
Concessional Release | None specified for New Zealand. |
General | No further information available. |
Wood/Timber – Sawn
Import Permits or Declarations |
Import permit required. Conditions on the import permit may include the following additional declarations: “The timber/wood product has undergone vacuum impregnation with copper-chrome arsenate within 21 days of shipment” OR “The timber/wood product has been fumigated with methyl bromide at normal atmospheric pressure at a rate of 48g/m3 for 24 hours at 21˚C or above, within 21 days of shipment” OR “The timber/wood product has been fumigated with sulphuryl fluoride (Vikane) at normal atmospheric pressure at a rate of 64 g/m3 for 16 hours at 21˚C or above, within 21 days of shipment” OR “The timber/wood product with maximum thickness <number> mm has been heat treated to at least 74˚C for <number> hours, with the timber appropriately stacked with spacers to allow free flow of air.” See heat treatment field below for durations required for timber thicknesses. |
||||||||||||||||||||
Certification Requirements | Phytosanitary certificate required. | ||||||||||||||||||||
Prohibited Importations | |||||||||||||||||||||
Bark | Free of bark. | ||||||||||||||||||||
Insects | Free of quarantine pests. | ||||||||||||||||||||
Fungi | Free of quarantine pests. | ||||||||||||||||||||
Soil | Free of soil and debris. | ||||||||||||||||||||
Other | Free of leaves and foreign matter. | ||||||||||||||||||||
Pre-Shipment Inspections | Verification inspection required. | ||||||||||||||||||||
Approved Pre-Shipment Treatments | Conditions on the import permit may include preservative treatment, fumigation or heat treatment. | ||||||||||||||||||||
Fumigation |
Conditions on the import permit may include: Fumigation with methyl bromide at normal atmospheric pressure at a rate of 48g/m3 for 24 hours at 21˚C or above, within 21 days of shipment; OR Fumigation with sulphuryl fluoride (Vikane) at normal atmospheric pressure at a rate of 64 g/m3 for 16 hours at 21˚C or above, within 21 days of shipment. |
||||||||||||||||||||
Antisapstain treatments | |||||||||||||||||||||
Insecticide treatments | |||||||||||||||||||||
Heat treatments |
Conditions on the import permit may include heat treatment at minimum 74˚C product temperature for one of the following durations depending on the thickness of the wood:
|
||||||||||||||||||||
Preservative treatments |
Conditions on the import permit may include vacuum impregnation with copper-chrome arsenate within 21 days of shipment. |
||||||||||||||||||||
Concessional Release | None specified for New Zealand. | ||||||||||||||||||||
General | No further information available. |
Wood/Timber – Chips
Import Permits or Declarations | Import permit required except for wood shavings, wood wool, sawdust and wood flour. |
Certification Requirements | Phytosanitary certificate required except for wood shavings, wood wool, sawdust and wood flour. |
Prohibited Importations | |
Bark | |
Insects | Free of quarantine pests. |
Fungi | Free of quarantine pests. |
Soil | Free of soil and debris. |
Other | Free of leaves and foreign matter. |
Pre-Shipment Inspections | Verification inspection required except for wood shavings, wood wool, sawdust and wood flour. |
Approved Pre-Shipment Treatments | |
Fumigation | |
Antisapstain treatments | |
Insecticide treatments | |
Heat treatments | |
Preservative treatments | |
Concessional Release | None specified for New Zealand. |
General | No further information available. |
Wood Products – Reconstituted/Plywood/LVL/Veneer
Import Permits or Declarations | Import permit NOT required. |
Certification Requirements | Phytosanitary certificate NOT required. |
Prohibited Importations | |
Bark | |
Insects | Free of quarantine pests. |
Fungi | Free of quarantine pests. |
Soil | Free of soil and debris. |
Other | Free of leaves and foreign matter. |
Pre-Shipment Inspections | Verification inspection NOT required. |
Approved Pre-Shipment Treatments | |
Fumigation | |
Antisapstain treatments | |
Insecticide treatments | |
Heat treatments | |
Preservative treatments | |
Concessional Release | None specified for New Zealand. |
General | No further information available. |
Wood Products – Manufactured
Import Permits or Declarations | Import permit NOT required. |
Certification Requirements | Phytosanitary certificate NOT required. |
Prohibited Importations | |
Bark | |
Insects | Free of quarantine pests. |
Fungi | Free of quarantine pests. |
Soil | Free of soil and debris. |
Other | Free of leaves and foreign matter. |
Pre-Shipment Inspections | Verification inspection NOT required. |
Approved Pre-Shipment Treatments | |
Fumigation | |
Antisapstain treatments | |
Insecticide treatments | |
Heat treatments | |
Preservative treatments | |
Concessional Release | None specified for New Zealand. |
General | No further information available. |
Wood Products – Artifacts
|
Import permit NOT required. |
Certification Requirements |
Phytosanitary certificate required. |
Prohibited Importations |
|
Bark |
|
Insects |
Free of quarantine pests. |
Fungi |
Free of quarantine pests. |
Soil |
Free of soil and debris. |
Other |
Free of leaves and foreign matter. |
Pre-Shipment Inspections |
Verification inspection required. |
Approved Pre-Shipment Treatments |
Must be fumigated with methyl bromide. |
Fumigation |
Fumigated with 48g/m3 methyl bromide for 16 hours at minimum temperature 21˚C. |
Antisapstain treatments |
|
Insecticide treatments |
|
Heat treatments |
|
Preservative treatments |
|
Concessional Release |
None specified for New Zealand. |
General |
No further information available. |
Wood Products – Packaging
Import Permits or Declarations | Import permit NOT required. |
Certification Requirements |
Wood packaging material and dunnage must be marked in accordance with ISPM 15. Phytosanitary certificate NOT required. |
Prohibited Importations | |
Bark | Wood packaging material and dunnage must be made of debarked wood in accordance with ISPM 15. |
Insects | Free of quarantine pests. |
Fungi | Free of quarantine pests. |
Soil | Free of soil and debris. |
Other | Free of leaves and foreign matter. |
Pre-Shipment Inspections | Verification inspection NOT required. |
Approved Pre-Shipment Treatments | |
Fumigation | Wood packaging material and dunnage must be treated in accordance with ISPM 15. |
Antisapstain treatments | |
Insecticide treatments | |
Heat treatments | Wood packaging material and dunnage must be treated in accordance with ISPM 15. |
Preservative treatments | |
Concessional Release | None specified for New Zealand. |
General | No further information available. |