Disclaimer
The information in this standard is provided on the following basis. The phytosanitary requirements found in this standard may be used as the basis of export certification. However, requirements may be changed by importing countries at any time at short notice or with no notice to New Zealand. This information is provided strictly on the basis that the Crown, the Ministry for Primary Industries, its statutory officers, employees, agents and all other persons responsible for or associated with the compilation, writing, editing, approval or publication of the information:
- disclaim any and all responsibility for any inaccuracy, error, omission, lateness, or any other kind of inadequacy, deficiency or flaw in, or in relation to, the information; and
- without limiting (1) above, fully exclude any and all liability of any kind on the part of all of them, to any person or entity that chooses to rely on this information
Compliance with this standard is not to be taken as a guarantee that any particular goods will be granted access to any overseas market.
Last Updated: 3 December 2019
Commodities
Logs
Import Permits or Declarations | Import permit required. | ||||||||||||||||||
Certification Requirements | Phytosanitary certificate required. | ||||||||||||||||||
Prohibited Importations | |||||||||||||||||||
Bark | Free of bark | ||||||||||||||||||
Insects | Free of quarantine pests | ||||||||||||||||||
Fungi | Free of quarantine pests | ||||||||||||||||||
Soil | Free of soil | ||||||||||||||||||
Other | |||||||||||||||||||
Pre-Shipment Inspections | Verification inspection required. | ||||||||||||||||||
Approved Pre-Shipment Treatments | See conditions on import permit. | ||||||||||||||||||
Fumigation |
See conditions stated on import permit. Import permit may specify fumigation with:
|
||||||||||||||||||
Antisapstain treatments | |||||||||||||||||||
Insecticide treatments | |||||||||||||||||||
Heat treatments |
See conditions on import permit. Import permit may specify heat treatment at 74˚C for the following durations:
|
||||||||||||||||||
Preservative treatments | The timber/ wood product has undergone vacuum impregnation with Copper-Chrome Arsenate (CCA) at ≥ 3.5g/m3 | ||||||||||||||||||
Concessional Release | Wood products from NZ are allowed entry 90 days following sterilisation (usually 21 days). | ||||||||||||||||||
General | Phytosanitary certificates must contain details of sterilisation either on the certificate or attached. All wood products inspected on arrival. |
Wood/ Timber - Poles
Import Permits or Declarations | Import permit required. | ||||||||||||||||||
Certification Requirements | Phytosanitary certificate required. | ||||||||||||||||||
Prohibited Importations | |||||||||||||||||||
Bark | Free of bark | ||||||||||||||||||
Insects | Free of quarantine pests | ||||||||||||||||||
Fungi | Free of quarantine pests | ||||||||||||||||||
Soil | Free of soil | ||||||||||||||||||
Other | |||||||||||||||||||
Pre-Shipment Inspections | Verification inspection required. | ||||||||||||||||||
Approved Pre-Shipment Treatments | See conditions on import permit. | ||||||||||||||||||
Fumigation |
See conditions stated on import permit. Import permit may specify fumigation with:
|
||||||||||||||||||
Antisapstain treatments | |||||||||||||||||||
Insecticide treatments | |||||||||||||||||||
Heat treatments |
See conditions on import permit. Import permit may specify heat treatment at 74˚C for the following durations:
|
||||||||||||||||||
Preservative treatments | The timber/ wood product has undergone vacuum impregnation with Copper-Chrome Arsenate (CCA) at ≥ 3.5g/m3 | ||||||||||||||||||
Concessional Release | Wood products from NZ are allowed entry 90 days following sterilisation (usually 21 days). | ||||||||||||||||||
General | Phytosanitary certificates must contain details of sterilisation either on the certificate or attached. All wood products inspected on arrival. |
Wood/ Timber - Sawn
Import Permits or Declarations | Import permit required. | ||||||||||||||||||
Certification Requirements | Phytosanitary certificate required. | ||||||||||||||||||
Prohibited Importations | |||||||||||||||||||
Bark | Free of bark | ||||||||||||||||||
Insects | Free of quarantine pests | ||||||||||||||||||
Fungi | Free of quarantine pests | ||||||||||||||||||
Soil | Free of soil | ||||||||||||||||||
Other | |||||||||||||||||||
Pre-Shipment Inspections | Verification inspection required. | ||||||||||||||||||
Approved Pre-Shipment Treatments | See conditions on import permit. | ||||||||||||||||||
Fumigation |
See conditions stated on import permit. Import permit may specify fumigation with:
|
||||||||||||||||||
Antisapstain treatments | |||||||||||||||||||
Insecticide treatments | |||||||||||||||||||
Heat treatments |
See conditions on import permit. Import permit may specify heat treatment at 74˚C for the following durations:
|
||||||||||||||||||
Preservative treatments | The timber/ wood product has undergone vacuum impregnation with Copper-Chrome Arsenate (CCA) at ≥ 3.5g/m3 | ||||||||||||||||||
Concessional Release | Wood products from NZ are allowed entry 90 days following sterilisation (usually 21 days). | ||||||||||||||||||
General | Phytosanitary certificates must contain details of sterilisation either on the certificate or attached. All wood products inspected on arrival. |
Wood/ Timber - Chips
Import Permits or Declarations |
Import permit required. |
||||||||||||||||||
Certification Requirements |
Phytosanitary certificate required. |
||||||||||||||||||
Prohibited Importations |
|
||||||||||||||||||
Bark |
Free of bark |
||||||||||||||||||
Insects |
Free of quarantine pests |
||||||||||||||||||
Fungi |
Free of quarantine pests |
||||||||||||||||||
Soil |
Free of soil |
||||||||||||||||||
Other |
|
||||||||||||||||||
Pre-Shipment Inspections |
Verification inspection required. |
||||||||||||||||||
Approved Pre-Shipment Treatments |
See conditions on import permit. |
||||||||||||||||||
Fumigation |
See conditions stated on import permit. Import permit may specify fumigation with:
|
||||||||||||||||||
Antisapstain treatments |
|
||||||||||||||||||
Insecticide treatments |
|
||||||||||||||||||
Heat treatments |
See conditions on import permit. Import permit may specify heat treatment at 74˚C for the following durations:
|
||||||||||||||||||
Preservative treatments |
The timber/ wood product has undergone vacuum impregnation with Copper-Chrome Arsenate (CCA) at ≥ 3.5g/m3 |
||||||||||||||||||
Concessional Release |
Wood products from NZ are allowed entry 90 days following sterilisation (usually 21 days). |
||||||||||||||||||
General |
Phytosanitary certificates must contain details of sterilisation either on the certificate or attached. All wood products inspected on arrival. |
Wood products – Reconstituted/ Plywood/ LVL/ Veneer
Import Permits or Declarations |
Import permit NOT required. |
Certification Requirements |
Phytosanitary certificate required. |
Prohibited Importations |
|
Bark |
Free of bark |
Insects |
Free of quarantine pests |
Fungi |
Free of quarantine pests |
Soil |
Free of soil |
Other |
|
Pre-Shipment Inspections |
Verification inspection required. |
Approved Pre-Shipment Treatments |
|
Fumigation |
|
Antisapstain treatments |
|
Insecticide treatments |
|
Heat treatments |
|
Preservative treatments |
|
Concessional Release |
None specified for New Zealand. |
General |
All wood products inspected on arrival. |
Wood products – Manufactured
Import Permits or Declarations |
Import permit NOT required. |
Certification Requirements |
Phytosanitary certificate required. |
Prohibited Importations |
|
Bark |
Free of bark |
Insects |
Free of quarantine pests |
Fungi |
Free of quarantine pests |
Soil |
Free of soil |
Other |
|
Pre-Shipment Inspections |
Verification inspection required. |
Approved Pre-Shipment Treatments |
|
Fumigation |
|
Antisapstain treatments |
|
Insecticide treatments |
|
Heat treatments |
|
Preservative treatments |
|
Concessional Release |
None specified for New Zealand. |
General |
All wood products inspected on arrival. |
Wood Products - Packaging
Import Permits or Declarations |
Import permit NOT required. |
Certification Requirements |
Wood packaging material and dunnage must be marked in accordance with ISPM 15. |
Prohibited Importations |
|
Bark |
Wood packaging material and dunnage must be made of debarked wood in accordance with ISPM 15. |
Insects |
Free of quarantine pests |
Fungi |
Free of quarantine pests |
Soil |
Free of soil |
Other |
Second hand packaging previously used for the carrying of plant material is prohibited. Packaging must be new or thoroughly cleaned and in good condition. |
Pre-Shipment Inspections |
Verification inspection NOT required. |
Approved Pre-Shipment Treatments |
Wood packaging material and dunnage must be treated in accordance with ISPM 15. |
Fumigation |
Wood packaging material and dunnage must be treated in accordance with ISPM 15. |
Antisapstain treatments |
|
Insecticide treatments |
|
Heat treatments |
Wood packaging material and dunnage must be treated in accordance with ISPM 15. |
Preservative treatments |
|
Concessional Release |
|
General |
|
Bark
Import Permits or Declarations |
Import permit required. |
Certification Requirements |
Phytosanitary certificate required. |
Prohibited Importations |
|
Bark |
|
Insects |
Free of quarantine pests |
Fungi |
Free of quarantine pests |
Soil |
Free of soil |
Other |
|
Pre-Shipment Inspections |
Verification inspection required. |
Approved Pre-Shipment Treatments |
Sterilisation treatment. |
Fumigation |
|
Antisapstain treatments |
|
Insecticide treatments |
|
Heat treatments |
|
Preservative treatments |
|
Concessional Release |
Wood products from NZ are allowed entry 90 days following sterilisation (usually 21 days). |
General |
Phytosanitary certificates must contain details of sterilisation either on the certificate or attached. All wood products inspected on arrival. |